Please consider supporting our efforts.The Dandy Forum is FREE but we do have running cost, please consider a small donation to help us cover our running cost.

× A range of threads that you may wish to take part in

Question tips

  • geprge17
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
3 years 6 months ago #1547 by geprge17
tips was created by geprge17
Here's a good site to check the wind

I need to store my Dandy out side for the winter so I have collected the roof of the Dandy in a heap in the middle of the trailer, when I put the outer cover on it forms a peak and lets the water run off. Since we may not use the Dandy again this year (might do though) we wraped clingfilm all the way round the top half of the trailer before we put the cover on just to keep any bugs/water out.(cheap as mince )

I fitted a TV bracket to the wall opposite to the table (designer) I drilled tow holes in the metal box section to take the screw head and a futher two to take the screw shank at top and bottom of the wall, I then fitted a 4 inch piece of pine wood the same width as the box section this gave enough strengh to the formica backing to hang the TV. I used some cable trunking to hide the wires. The bracket needs to be as flat as possible I got mine for £1.49 :woohoo: from Argos , I have also fitted lids to the sink/cooker to give some table top space :)
I attach a photo

Planning to strip / clean the jocky wheel and fit new trailer wiring plug next.

This message has an attachment image.
Please log in or register to see it.

The following user(s) said Thank You: NeilT

Please Log in or Create an account to join the conversation.

Time to create page: 0.405 seconds
Powered by Kunena Forum