Please consider supporting our efforts.The Dandy Forum is FREE but we do have running cost, please consider a small donation to help us cover our running cost.

Amount
× Questions and Answers

Fire away with any questions that you may have re the Dandy Trailer tent , folding camper

Question Seals on the folding edge

More
4 years 5 months ago #43 by Gray
Replied by Gray on topic Seals on the folding edge
Hi Neal the roof was flapping a bit but not a lot. As i said i will pop the alloy strip off next weekend and have a look and the foam seal . I have sent for some double sided sticky foam tape. I will also leave a five mm gap and fill that with some silicone sikaflex 221

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago - 4 years 5 months ago #65 by fearful wizard
Replied by fearful wizard on topic Seals on the folding edge
wont let me post link
Last edit: 4 years 5 months ago by fearful wizard.

Please Log in or Create an account to join the conversation.

  • NeilT
  • NeilT's Avatar
  • Offline
  • Moderator
  • Moderator
  • Former Dandy Owner
More
4 years 5 months ago #67 by NeilT
Replied by NeilT on topic Seals on the folding edge

wont let me post link


What are you trying to do? and do you get an error? :blush:

<<Its the way the mop flops>>

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #125 by Gray
Replied by Gray on topic Seals on the folding edge
Hi spoken to Ian at Riva Dandy and he said there is to ways to do it one put a bead of silicone along the alloy strip . Or change the foam.. Think am going to go down replace the foam . Am going to use double sided sticky foam tape going to leave a few mm gap at the top of the alloy strip. Then fill that gap with some black silicone . Am sure that will sort it out .

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #290 by Gray
Replied by Gray on topic Seals on the folding edge
Well today I had time to drill the rivets out of the alloy strip and take it off for a look to see what the foam seal was like .Come not see much wrong with it had shrunk a bit on the end . So I have taken it off . Put some foam double sided on the strip . On the bottom of the strip I've put a bead of silicon put it back on and re riveted it back on . See whats it like next month we are away

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #291 by Gray
Replied by Gray on topic Seals on the folding edge
Well today I had time to drill the rivets out of the alloy strip and take it off for a look to see what the foam seal was like .Come not see much wrong with it had shrunk a bit on the end . So I have taken it off . Put some foam double sided on the strip . On the bottom of the strip I've put a bead of silicon put it back on and re riveted it back on . See whats it like next month we are away

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.454 seconds
Powered by Kunena Forum
UA-31887120-1