Please consider supporting our efforts.The Dandy Forum is FREE but we do have running cost, please consider a small donation to help us cover our running cost.

Amount
× Questions and Answers

Fire away with any questions that you may have re the Dandy Trailer tent , folding camper

Question A simple one.

  • Brianlec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
2 years 10 months ago #1493 by Brianlec
A simple one. was created by Brianlec
What size are the bolts holding the tow hitch to the A frame? 10mm or 12mm, not bothered about the length.

The dandy is in France at the moment and I'm not. The previous owner had raised the hitch off the A frame with spacers by about 10cm. I assume to make it line up better with his tow ball, (the dandy spec is lower than standard) but the down side is the brake rod drags on the underside of the trailer frame. Not ideal.
So I want to reduce the spacer size which means new bolts, just want to know what size to get, as I will be doing it next time I pop over to see it.

Brian.

Please Log in or Create an account to join the conversation.

  • NeilT
  • NeilT's Avatar
  • Offline
  • Moderator
  • Moderator
  • Former Dandy Owner
More
2 years 10 months ago #1496 by NeilT
Replied by NeilT on topic A simple one.
You would be best to give Ian at Riva call, he should be able to help.

<<Its the way the mop flops>>

Please Log in or Create an account to join the conversation.

  • Brianlec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
2 years 10 months ago #1498 by Brianlec
Replied by Brianlec on topic A simple one.
It's annoying to say the least. When I was about to buy it I discovered the draw bar was seized, so took the hitch complete off the A frame to clean the rust off. It works fine now.
But I can't remember if I used a 17 or 19mm spanner.

Brian.

Please Log in or Create an account to join the conversation.

Time to create page: 0.354 seconds
Powered by Kunena Forum
UA-31887120-1