Please consider supporting our efforts.The Dandy Forum is FREE but we do have running cost, please consider a small donation to help us cover our running cost.

Amount:
Welcome, Guest
Username: Password: Remember me
24 May 2017
After years of running this site, I have now gone to The Dark Side. This web site will continue, but I really need someone new to take over.
Questions and Answers

Fire away with any questions that you may have re the Dandy Trailer tent , folding camper
  • Page:
  • 1

TOPIC: Dandy awniing

Dandy awniing 2 years 9 months ago #932

  • bogeynight
  • bogeynight's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 2
Thanks for the help so far a further query, I have been looking at a drive away awning that has the attachment height of 170 to 220 I am concerned that this is not high enough for a DESIGNER. I cant measure mine as its not stored at home. Any of you have non Dandy awnings what height are yours.
Many Thanks
Bogeynight.

Please Log in or Create an account to join the conversation.

Dandy awniing 2 years 9 months ago #936

  • maria
  • maria's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 19
  • Thank you received: 4
Hi friend I have my recently acquired Dandy Discovery parked up erected in the open barn right now - I have been told this model is identical to the Designer, so I popped out and measured up for you today- please make an allowance for grotty springs etc- though mine seem fine -The door height is approx 80 inches from the ground (6 foot 8 inches). The apex of the Dandy discovery highest center line is 2.30 M or 7'6"to the ground. Draw a mental line down the middle of the door then go 1 Meter to either side - measurement from highest point of Dandy at that longitude (1 meter from center of door) to the ground 6 foot 8 inches or 2.03 meters. Hope this helps. Nice tidy measurements don't you think.? The door by the way is around 22 inches if I remember correctly with an arched top so allow 11 inches to door apex from hinge side for opening out flat , if you see what I mean? :S

Please Log in or Create an account to join the conversation.

Last edit: by maria.

Dandy awniing 2 years 9 months ago #959

  • bogeynight
  • bogeynight's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 2
Maria. Many thanks for your help.
Bogeynight
The following user(s) said Thank You: maria, breezer88

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.384 seconds
Powered by Kunena Forum
UA-31887120-1