Please consider supporting our efforts.The Dandy Forum is FREE but we do have running cost, please consider a small donation to help us cover our running cost.

Amount
× Questions and Answers

Fire away with any questions that you may have re the Dandy Trailer tent , folding camper

Question Epoxy?

  • TaraMc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 4 months ago - 3 years 4 months ago #1118 by TaraMc
Epoxy? was created by TaraMc
Hi all,

I joined here at the end of the season last year as I was looking for a Dandy and was learning all I could about them. I've subsequently bought a 1997 dandy dart. Mostly in pretty good nick except for one little annoyance. The door seal had gone and was letting a small amount of water in onto the floor if the camper was driven in wet weather. I decided that this was definitely within the realms of my ability to sort, so went ahead and bought the camper, drove it home and its been in my garage part open drying out for 3 months now. I've got a good few days clear over the coming week so I thought I would start getting her ready for the new season and I would fix the door and harden the floor in the small area where it was damp as I am pretty sure that fibre board will be compromised a little if it has been wet. Anyhoo I am sure I saw a post on the old forum about coating the floor with an epoxy treatment, but can I find it, can I heck. Could one of you lovely people either tell me what kind of epoxy it is that I need to buy, or point me in the direction of the post please.

Many thanks in advance
Tara
Last edit: 3 years 4 months ago by TaraMc.

Please Log in or Create an account to join the conversation.

More
3 years 4 months ago #1119 by davemarshall
Replied by davemarshall on topic Epoxy?
Hope this helps some on the caravan forum below suggests expanding foam as well
Apollo Adhesives ltd High meadows billington ave littlehaywood staffs st18 0uz tel 01889 271692 you will get two tins to mix together DONT DRILL 1inch holes you should mark the floor of in 4 inch squares and drill in the corner of each square dont drill hole till you get kit there should be a plunger with the kit drill from inside van only through the top ply and poke a rod down to the bottom ply DONT GO THROUGH THE BOTTOM PLY HOPE THIS WILL HELP
Read more at www.practicalcaravan.com/forum/technical...#usSvk6DWLqODGpgx.99
On 22 Feb 2016, at 12:14, Dandy Trailer Tent Forum <This email address is being protected from spambots. You need JavaScript enabled to view it.> wrote:

Please Log in or Create an account to join the conversation.

  • TaraMc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 4 months ago - 3 years 4 months ago #1120 by TaraMc
Replied by TaraMc on topic Epoxy?
Thanks Dave, that isnt really what I had imagined at all considering the patch is less than 4" by 4" id tnought it would be a brush on wood hardner type thing. Also I am struggling with the instruction to drill through to the last lamination, compressed chip is just that lots of compressed chips, there aren't really layers. Or am I missing something? Sorry to sound dim, I just want to make sure I understand it correctly before I wade on in.
Many Thanks
Last edit: 3 years 4 months ago by TaraMc.

Please Log in or Create an account to join the conversation.

Time to create page: 0.466 seconds
Powered by Kunena Forum
UA-31887120-1